Warmup StickyMat

WarmUp StickyMat 200W/m²

  • £63.50 +VAT
  • RRP £105.83
SKU: 2SPM1-1.0m²

WarmUp 200W/m² heating mat with pressure sensitive adhesive for fastest installation. Features ultra-thin 1.8mm wire that does not raise floor level. An ideal solution for installations in colder rooms (conservatory or outbuilding). Lifetime warranty.

View full description

Untitled Button
In stock

The StickyMat System is ideal for installations within regularly shaped areas, where the 0.5m wide mats can be quickly rolled out across the floor in parallel runs. If you intend on using vinyl, carpet, timber, tiles or any other underfloor heating compatible floor finish, the system can (and should, in some cases like for carpet) be embedded within a self-levelling compound to provide a flat and level floor surface to lay over.

The StickyMat system can be used with all floor types compatible with underfloor heating whether you are choosing laminate flooring, vinyl, carpet, tiles or other. The compatibility with all floor coverings and the fact that StickyMat does not visibly raise your floor height makes it the ideal system for refurbishment projects – just remember to double check with your flooring supplier that the floor type you want to go for is compatible with the StickyMat System.

200W/ m2 – power variant is best suited for rooms or areas with a high heat-loss such as conservatories. Be sure to carry out a heat-loss calculation to assess the heating requirements of the room. This is especially the case if you are considering using underfloor heating as a primary heat-source under tiles in a high heat-loss area.


  • Primary heating with an output of 200W/m²
  • 1.8mm dual-flouropolymer coated heating wire
  • Minimal wiring and earth shielded
  • Straight forward cut and turn installation with sticky underside
  • Cold cable 3M long
  • Lifetime limited warranty
  • CE Certified


Manufacturer Warmup
Model StickyMat
Part Number 2SPM1
Condition New
Range Heating Mat
StickyMat In m² StickyMat 1.0m² 200w
StictyMat Size m² 1.0m²-15.0m²
Output 200W/m²
Heating Type Primary heating for most rooms
Protection Earth shielded
Heating Cable Twin conductor
Cable Thickness 1.8mm
Operating Voltage 230V 50Hz
Cold Lead Length 3m
IP Rating IP X7
Warranty Lifetime