The StickyMat System is ideal for installations within regularly shaped areas, where the 0.5m wide mats can be quickly rolled out across the floor in parallel runs. If you intend on using vinyl, carpet, timber, tiles or any other underfloor heating compatible floor finish, the system can (and should, in some cases like for carpet) be embedded within a self-levelling compound to provide a flat and level floor surface to lay over.
The StickyMat system can be used with all floor types compatible with underfloor heating whether you are choosing laminate
flooring, vinyl, carpet, tiles or other. The compatibility with all floor coverings and the fact that StickyMat does not
visibly raise your floor height makes it the ideal system for refurbishment projects – just remember to double check with
your flooring supplier that the floor type you want to go for is compatible with the StickyMat System.
200W/ m2 – power variant is best suited for rooms or areas with a high heat-loss such as conservatories. Be sure to carry
out a heat-loss calculation to assess the heating requirements of the room. This is especially the case if you are considering
using underfloor heating as a primary heat-source under tiles in a high heat-loss area.
Features:
- Primary heating with an output of 200W/m²
- 1.8mm dual-flouropolymer coated heating wire
- Minimal wiring and earth shielded
- Straight forward cut and turn installation with sticky underside
- Cold cable 3M long
- Lifetime limited warranty
- CE Certified
Specifications
Manufacturer | Warmup |
---|---|
Model | StickyMat |
Part Number | 2SPM1 |
Condition | New |
Range | Heating Mat |
StickyMat In m² | StickyMat 1.0m² 200w |
StictyMat Size m² | 1.0m²-15.0m² |
Output | 200W/m² |
Heating Type | Primary heating for most rooms |
Protection | Earth shielded |
Heating Cable | Twin conductor |
Cable Thickness | 1.8mm |
Operating Voltage | 230V 50Hz |
Cold Lead Length | 3m |
IP Rating | IP X7 |
Warranty | Lifetime |
-
Warmup-Tech-Sheet-E01-StickyMat-V1.1-0916.pdf
pdf, 1.01 MB