The StickyMat System is ideal for installations within regularly shaped areas, where the 0.5m wide mats can be quickly rolled out across the floor in parallel runs. If you intend on using vinyl, carpet, timber, tiles or any other underfloor heating compatible floor finish, the system can (and should, in some cases like for carpet) be embedded within a self-levelling compound to provide a flat and level floor surface to lay over.
The StickyMat system can be used with all floor types compatible with underfloor heating whether you are choosing laminate flooring, vinyl, carpet, tiles or other. The compatibility with all floor coverings and the fact that StickyMat does not visibly raise your floor height makes it the ideal system for refurbishment projects – just remember to double check with your flooring supplier that the floor type you want to go for is compatible with the StickyMat System.
150W/ m2 – power variant can provide primary heating in well-insulated areas. Insulation boards retain heat in the room for longer. More importantly, they prevent downward heat-loss. The 150W/ m2 StickyMat can be laid on both timber and concrete subfloors.
- Primary heating with an output of 150W/m²
- 1.8mm dual-flouropolymer coated heating wire
- Minimal wiring and earth shielded
- Straight forward cut and turn installation with sticky underside
- Cold cable 3M long
- Lifetime limited warranty
- CE Certified
|StickyMat In m²||StickyMat 1.0m² 150w|
|StictyMat Size m²||1.0m²-15.0m²|
|Heating Type||Primary heating for most rooms|
|Heating Cable||Twin conductor|
|Operating Voltage||230V 50Hz|
|Cold Lead Length||3m|
|IP Rating||IP X7|
pdf, 1.01 MB