Warmup MSTAT
Warmup MSTAT Thermostat
Warmup MSTAT
Warmup MSTAT Thermostat

Warmup MSTAT Manual Thermostat (16A)

  • £45.50 +VAT
  • RRP £69.99
SKU: MSTAT-dial-stat

No need to set-up a programme, the Warmup MSTAT is simple and intuitive, allowing you to set your comfort temperature in seconds with a twist of a dial. Air and floor temperature control.


View full description

-
+

The upgraded Warmup MSTAT is a manual thermostat that can be used with either underfloor or central heating. Setting the comfort temperature is easy with MSTAT, simply turn the dial and let the thermostat do the rest.

Designed with an integrated dual air and floor sensor, MSTAT gives you the choice to set an air comfort temperature or a floor comfort temperature.

MSTAT is perfect for rooms which do no not benefit or require a set heating program, where you want fast and simple control of your heating system.


 Warmup MSTAT Floor Heating Thermostat:

  • Air and floor temperature control
  • Heat and power on indication
  • Modern appearance
  • Easily Increase or decrease the required temperature
  • Range: 05-35C
  • Fitting: MSTAT depth allows flush mounting in standard 35mm back box
  • Max Load: 16A Switching
  • Sensor Type: NTC12K 3m Long
  • IP Rating: IP21
  • Warranty: 3 Years

Specifications

Manufacturer Warmup
Range Warmup
Model MSTAT
Part Number MSTAT White Manual
Condition New
Current Load: 16A 3,600W
Sensor Type: NTC 12K 3.0m long
IP Rating IP21
Set Temperature Range: 5-35°C
Dimensions (HxWxD) mm: 86x86x50
Warranty 3 year warranty

Identify Suitable Location

Before making any permanent fixtures Warmup recommends identifying your preferred location for the MSTAT. It should be located in an area with good ventilation. It should not be beside a window/door, in direct sunlight or above another heat generating device (e.g. radiator or TV).

BATHROOM INSTALLATIONS: When installing a MSTAT within a bathroom it MUST be mounted outside of Zone 2 in accordance with the Wiring Regulations. If it is not possible to identify a suitable location outside of Zone 2 within the bathroom, then it is recommended that the MSTAT is installed in the adjacent room and set to control the heating by floor temperature only. When installed in this way, it is not possible to directly control the heating based on the room air temperature, only the floor surface temperature.

 

Installation

Wire as show and install to a 35mm deep (min.) pattress box