0

0

You have no items in your shopping cart.

sales@purelyelectrique.co.uk
Telephone: 020 3397 7872

Under Tile Cable Damage Sensor

Underfloor Heating Cable Damage Sensor

Be the first to review this product

Availability: In stock

Purely Electrique

Availability: In stock

Regular Price: £9.99

Special Price £8.50

Prices shown Excl. VAT

Details

Under Tile Cable Damage Sensor

This sensor will sound an alarm and alert you when you have damaged the heating cables of the underfloor heating system you are installing – This is a must have for any installer of electric underfloor heating, as it can save effort, time and money.

How Does It Work?

Merely connect the underfloor heating cables to the back of the damage sensor and you are ready to start installing. If the heating cables are damaged at any point by the installer, tiler, floor fitter etc… an audible alarm will sound alerting you. Although electric underfloor heating elements are strong, the cables can still be damaged in the process of installation. This damage sensor is beneficial in several ways; firstly, it can save on floor removal or costly repairs. Secondly, it can be used repeatedly and is available on a one off cost. Finally, the damage sensor can save time… knowing you have damaged the heating cables before laying any final floor finishes can save you a lot of time and money.

Additional Information

Installation

The following instructions are very important before commencing installation.

  1. Clip the Brown or Red wire of the element cold tail to L1 (red lead)
  2. Clip the Blue or Black wire of the element cold tail to L2 (Black lead)
  3. Clip the Earth Braid of the element cold tail to the Green lead of the tester.
  4. Switch the tester on.
  5. A Red Light then shows that the tester is on and working.
  6. If you have a fault the tester will start “Beeping” If there is no “Beep” you can continue with the installation
  7. Is the beep sounds at any time, before or during installation STOP IMMEDIATELY as this means that damage has occurred to the element and you will need to contact an electrician for repair.
  8. Once you have finished the installation and before you start tiling reconnect the tester as above & turn on.
  9. Keep the tester on until your tiling is complete.
  10. If the tester light turns off you will need to replace the batteries

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Description

Details

Under Tile Cable Damage Sensor

This sensor will sound an alarm and alert you when you have damaged the heating cables of the underfloor heating system you are installing – This is a must have for any installer of electric underfloor heating, as it can save effort, time and money.

How Does It Work?

Merely connect the underfloor heating cables to the back of the damage sensor and you are ready to start installing. If the heating cables are damaged at any point by the installer, tiler, floor fitter etc… an audible alarm will sound alerting you. Although electric underfloor heating elements are strong, the cables can still be damaged in the process of installation. This damage sensor is beneficial in several ways; firstly, it can save on floor removal or costly repairs. Secondly, it can be used repeatedly and is available on a one off cost. Finally, the damage sensor can save time… knowing you have damaged the heating cables before laying any final floor finishes can save you a lot of time and money.

Installation Information

Additional Information

Installation

The following instructions are very important before commencing installation.

  1. Clip the Brown or Red wire of the element cold tail to L1 (red lead)
  2. Clip the Blue or Black wire of the element cold tail to L2 (Black lead)
  3. Clip the Earth Braid of the element cold tail to the Green lead of the tester.
  4. Switch the tester on.
  5. A Red Light then shows that the tester is on and working.
  6. If you have a fault the tester will start “Beeping” If there is no “Beep” you can continue with the installation
  7. Is the beep sounds at any time, before or during installation STOP IMMEDIATELY as this means that damage has occurred to the element and you will need to contact an electrician for repair.
  8. Once you have finished the installation and before you start tiling reconnect the tester as above & turn on.
  9. Keep the tester on until your tiling is complete.
  10. If the tester light turns off you will need to replace the batteries
We Also Recommend
Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Why Choose Us?

Our goal here at Purely Electrique is to help our customers reach their goals, offering the ultimate in warmth, relaxation and luxury.
Purely Electrique is a leading UK supplier of quality electric underfloor heating; we offer systems suitable for use under all types of flooring such as wood, carpet, tiles, Amtico and Karndean. Our Argent Foil, Mesh Mat and Loose Cable systems are specifically designed to meet the precise needs of homeowners, contractors and specifiers in the UK. We also offer a variety of contemporary digital touch screen thermostats – a perfect way to finish your interior. We strive to offer the best quality products for the most competitive price possible.
Purely Electrique have a knowledgeable and skilled team with up to 25 years experience in the heating trade that can offer friendly advice, technical help and sales support throughout your project. We offer a free quotation and a free CAD design service if required to make sure the installation process runs as smoothly as possible. Furthermore, we offer a next working day delivery service if the order is placed by 14:00pm.