0

0

You have no items in your shopping cart.

sales@purelyelectrique.co.uk
Telephone: 020 3397 7872

About Touch Screen Thermostats

Purely Electrique offer a range of contemporary touch screen thermostats that will finish any interior to the highest standard.

We offer several different thermostats that are all digital touchscreen and come in a variety of finishes. Below you can find images for all of our thermostats.

Our best-selling thermostat is the PE Stat; this entry level thermostat is easy to use, stylish and affordable. The latest addition to our line of thermostats is the NeoStat from Heatmiser. This thermostat allows control from anywhere, as it can be linked with an app on smart phones and tablets to deliver a convenient method of controlling your heating. NeoApp is designed to work perfectly with neoHub and neoStats. Together they present an advanced heating control solution that is perfect for modern lifestyles.

Purely Electrique’s high quality thermostat range also includes the Mirage, Marquis and the Phoenix touch screen thermostats which combine clever design with state of the art technology. All the thermostats in the range are suitable for use with electric underfloor heating and all boiler systems.

This collection of thermostats is the perfect choice for those looking for a competitively priced yet state of the art way to complete their home, office or garden room.

Touch Screen Thermostats

Set Descending Direction

Set Descending Direction
Frequently Asked Questions
  • How much does Underfloor Heating cost to run?
    • The cost of running electric underfloor heating is usually less than that of using radiators as the heat is distributed evenly across a much larger surface area at a lower operating temperature. Also, electric underfloor heating costs less in the long term as it requires less maintenance than a radiator system. The use of insulation underneath the heating mat and choosing a material like tiles which transfers heat efficiently will reduce running costs for underfloor heating too.

      For a room of 12m² floor area.
      We would look to heat approximately 85% or 10m².

      With our 150W mats, when the heater is ON, the hourly consumption is 1500 Watts per hour.

      Assuming the room is properly insulated and controlled by an energy efficient thermostat, the system will operate at a duty cycle of 20% to 25% (the system will only be heating for 20% - 25% of the time it is switched on). In this scenario the average electricity consumption for heating the room will be 300 - 375 Watts per hour.

      The actual hourly cost depends on your local electricity rates.
  • Is insulation needed?
    • The correct insulation should be used in all electric underfloor heating installations. Insulation will reduce warm-up time of the floor from over an hour to only a few minutes; it will prolong the life of the cable in the heating system. Having an efficient heating system will provide you with a greater level of comfort and result in the reduction of your electricity costs.
  • Can I use Underfloor Heating in wet areas?
    • Our heating systems are earthed therefore safe to use in wet areas.
  • Are your systems easy to install?
    • The Mesh Mats and the Argent foil heating mats are very easily installed (for more information please contact us for our installation guide), however you will need a qualified electrician to complete the connection between the heating mats and the electrical circuit.
  • Can I cut the mats to fit my room?
    • You can cut the Mesh or the Foil but have to be very careful not to cut the heating cable.
  • How thick is the heating cable?
    • The cable in the Mesh Mat is 4mm, however cable in the Argent Foil heating mat is only 2mm
  • How long are the cold leads on the mats?
    • For both the Mesh Mat and the Argent Foil Mat the cold leads are 4m long.
  • Can Underfloor heating be used as a primary heat source?
    • In new builds or well insulated properties our heating systems usually provide primary heating. In properties which do not have double glazing, have vaulted ceilings, insufficient insulation or heating mat floor coverage is below the recommended 85% then you may need some back up heating.
  • What happens if I damage the heating cable?
    • If the cable gets damaged during installation, please contact us for further advice. To avoid the cable getting damaged, you should try to wear suitable shoes or put a covering down where you will be standing.
  • How long is the warranty on the systems?
    • Both the Mesh and Argent systems have a 16 years manufacturer’s warranty.